You are here: Home » News » Mavis » 文章 » The correct use of LED lighting can increase the life

The correct use of LED lighting can increase the life

Views: 19 Author: Site Editor Publish Time: 2016-12-17 Origin: Site

In the long-term usage, LED lamp also wear, some wrong operation plus, very easy to damage the LED lamp. Even the LED lamp, also need good maintenance, to play the greatest effect and longer service life. With the popularization of the LED lamp, more and more consumers are put on the LED lamp maintenance issues.

LED lamp in what circumstances will be bad?

1) LED lamp quality not good more often fails to identify, buy a quality brand purchase.

2) In accordance with product instructions LED lamps for the correct use of easy breakdown, the existence of hidden dangers.

3) When in use, too large rated current more than LED lamp current, will cause LED to drive part of the power components in burned or breakdown risk. LED lamp "mist" problem, pointed candle lamp, bulb, cast light on the light after a period of time the housing wall there drops, mist phenomenon. LED lamp is generally composed of several different materials such as lamp cup assembly, radiating part is metal, shade for plastic; the lamp will produce some heat is in the works, the different coefficients of thermal expansion of different materials, long-term use will be in the joint of different materials to produce the gap and into the gas; when used in a high humidity. Environment, and internal temperature of different lampshade lampshade, internal heated gas will shade at the cold, if gas water vapor contained more, will produce mist and water phenomenon, to light after a period of time, this phenomenon will disappear. Therefore, the wet environment also factors influenced LED lamp life.

LED lamp using principles and maintenance methods:

One, buy Lamps, the first not to busy to install, should carefully read the installation instructions, and then follow the installation instructions in accordance with good lighting, otherwise there may be dangerous.

Two, in cleaning and maintenance do not change the lamp, also do not arbitrarily change the lamp parts, in the maintenance, as is the lamp should be installed, do not drain installation, the installation error lighting components.

Three, in the use of lamps, try not to frequent, although resistance to switch LED lamp number is about 18 times the ordinary fluorescent lamp, but too frequently will still affect the LED lamp internal electronic components life, thus affecting the service life of the lamp.

Four, with particular attention to, in addition to the special LED lamps, LED lamps should avoid the use of common in moist environment. Electronic components, humid environment will affect the driving power of LED lamp, electronic components from moisture, shorten lamp life.

Therefore, moisture is the key of lighting maintenance, especially focal headlight LED lamp and the kitchen and toilet, bathroom, must install moistureproof lamp shade, to prevent moisture intrusion, avoid corrosion damage or leakage short-circuit.

Finally, the LED lamp is best not to use water to clean, as long as with dry dishcloth Zhanshui wipe, if not be run into the water to try to avoid the lights immediately after dry, wipe with a damp cloth.

Reminder:

1) The ordinary LED lamp can not be used in the circuit light regulating desk lamp, a delay switch, the induction switch.

2) Avoid the use of high temperature and high humidity environment.

3) LED lamp is the main internal power driven, suggested that non professionals don't self loading assembly, so as to avoid the electric shock danger.