Views: 10 Author: Site Editor Publish Time: 2016-11-09 Origin: Site
The current global energy shortage, energy conservation is an important issue facing the future of humanity. LED as a new type of green lighting products, further development in the country and the Government to promote, market demand for LED lighting escalating. In the current lighting market, there is a class of LED lighting products, market share is growing, it is playing an increasingly important role –LED flat lamp. LED panel light in recent years gradually become a business and a consumer favorite public lighting, it is a dark horse stance in the global lighting market attention.
The reason of rapid rise of the LED panel light
With the development of society, people’s living standards improve, the general lighting is not suitable for people’s needs, people began to pursue a green green living environment, the emergence of LED panel lights to meet consumers increasingly shift consumer demand.
First, LED flat lighting energy saving and environmental protection features. It has a higher luminous efficiency ratio and brightness advantage, panel lights at work, LED electro-optical conversion efficiency of 30% to 50%, which is three to five times the traditional incandescent lamp. That is to achieve the same brightness under the effect of tablet than traditional incandescent lamp 60% energy saving, and LED and incandescent lamps under the same energy, the higher brightness flat lamp. LED panel lighting technology is a green lighting technology, the products do not contain mercury, less waste, the manufacturing process is almost no pollution.
Secondly, LED panel light not only provide lighting, and add to the beauty of art. 600x600mm LED panel light uses a unique SMD chip as light source, with the light guide plate and (or) the diffusion plate, the LED panel light with its slim design is loved by the public, both good lighting effects, but also gives bring beautiful feeling.
Finally, LED panel light due to the appearance of thin, heat dissipation complete, with less heat, long life; and a variety of dynamic control procedures, such as the regulation and adjust the color temperature of light and dark levels of an external controller; not only did radiation and generation of glare, and can protect eyesight, light color more moderate and stable performance, low maintenance, cost-effective, space-saving and convenient transportation and installation.
LED flat lamp performance advantages and features of the product after it launched quickly as universally accepted by the public, just when the rise of LED lighting, mainly the traditional fluorescent light sources T5, T8 Grille main competitor LED flat lamp. As the price of LED panel light has been close to the traditional grid lamps, LED panel lights are fully reflected in market competition, more and more market recognition and consumer favorite.
Side-emitting and front emitting LED Panel Light
It is understood, LED panel light emitting mode by classification main side-emitting LED panel light and back light-emitting LED Panel Light (direct) two. Side-emitting LED panel light is mainly composed of frame scaffold, the diffusion plate, reflective panels, light guide plates, drive, light strips, light guide plate technology will use light guide front side. Since the light-emitting side plate is positioned around the LED should light guide through the light guide plate down, resulting in lower overall energy efficiency; and the high quality requirements of the light guide plate, relatively poor reliability.
Compared with the flat side-emitting LED lights, the light source can be very evenly distributed behind the diffuser plate, directly down the back according to the light-emitting LED flat lamp more advantages: first, because the light will be emitted from LED panel light diffuser plate through direct exposure out, thus greatly improving the energy efficiency of lighting systems; the second is a back-lit LED panel light guide plate omitted, so lighter; the third is omitted so that the lamp light guide plate lower cost, and greater internal space design more flexible; fourth, requires less components, higher reliability, better quality.
However, due to the need to ensure the lighting effects between the back-emitting LED Panel Light LED light source and the diffuser plate to have a certain distance to prevent the light emission point visually, and therefore can not be made too thin, so both have excellent LED Panel Light bad, designers or users can be suitably selected according to their needs.
How to choose LED Panel Light manufacturers?
Now LED panel light in the market, a significant advantage, more and more businesses or public consumption felt energy-efficient LED panel light and convenient, but the face of fierce market competition, for customers to choose a quality good LED flat lamp manufacturers is essential.
First, the product passed the relevant certification: in the choice of LED Panel Light manufacturers time to see whether they have the relevant certification, look at whether the products work fine material, and products have been certified national quality standard system of.
Second, the scale of production inspect manufacturers: before deciding to buy must be related to the flat-panel LED lamp manufacturer related field trips, visits the factory of manufacturing capacity, whether contracts, strength of the manufacturers will not delay delivery, contract guaranteed shipping date.
Third, after-sales service: select a problem if faulty LED Panel Light manufacturers caused it to fulfill its responsibilities for return, but all because the manufacturers and causes return, should pick-up service from the manufacturer.