gm@hzjyec.com          86-571-86239527        
You are here: Home » News » Kina » 文章

NEWS AND EVENTS

COB light source is a high-efficiency integrated surface light source technology with LED chip attached directly to high reflectivity mirror metal substrate. This technology eliminates the concept of stent, electroless plating, no reflow soldering and no patch process. One of the cost savings of one

24

2016-09

The New Led panel light
LED panel light is a high-end interior lighting, the outer frame of aluminum alloy by anodic oxidation, the light source is LED, lighting design simple and beautiful, luxurious atmosphere, both good lighting effects, but also brings beautiful feeling. Unique design LED panel light, the light guide plate after a high light transmittance to form a homogeneous plane glow effect, illuminance uniformity is good, light, soft, comfortable yet bright, can relieve eye fatigue. LED panel lights can also radiation, will not stimulate the pregnant women, the elderly, children's skin.                              About Us Our company last month have a new Led panel light order , and the quantity is about 20000 pcs, our customer told me in their market ,the panel lights are more and more popular.Below are the details of our products, please see the picture 

13

2016-09

why we choose LED tube
LED Tube Introduction LED lamps are also commonly known as LED light tube, LED fluorescent tube, LED fluorescent lamp, which uses LED as a light source thereof. The traditional fluorescent tubes, also known as fluorescent lamps have a filament ends, the inner tube is filled with trace amounts of argon and mercury vapor thin, coated with a phosphor on the tube wall, the gas emits ultraviolet light conductive filament between the two, the so that the phosphor to emit visible light. Because it contains heavy metal contaminants "Mercury", making scrapped fluorescent tubes environmental pollution is very serious. The LED lamp uses light-emitting diodes as a light source, light-efficient, more energy efficient, longer life, and more environmentally friendly. Become the stage instead of fluorescent tubes the best products. LED lamp with the traditional fluorescent lamp on the dimensions are the same caliber, there is lamp T5, T8 lamps, T10 lamp, length 0.6m, 0.9m, 1.2m, 1.5m, 1.8m, 2.4m. LED

10

2016-09

New LED dimmable Switch Bulb
It is really so exciting that our technical department developed some new LED products as below:LED Switch DimmableIt is not the normal dimmable lamps. It was controlled by the normal switch. The lamps have three steps of power. For instance: when switch first on, it is 6w(100% power); Take the switch off, it will shut off. Then second switch on, it will be changed as 3w(50% power); The third time will be only 0.6w(10% power). File attached are the photos. Do you have such kind of products? The parameters of the lamp table please check form, If you are interested, please don't hesitate to tell us. ​  SPECIFICATIONWATTS/THREE STEPSBASETENSION (V)COLOR TEMPERATUREMAXIMUM TEMPERATURE OF OPERATIONDIMENSIONSLED Switch Dimmable Candle 6W6w/3w/0.6wE27/E14180V-250V3000K/6400K80°C37mmx110mmLED Switch Dimmable G45 6W6w/3w/0.6wE27/E14180V-250V3000K/6400K80°C45mmx82mmLED Switch Dimmable A60 9W9w/4.5w/0.9wE27180V-250V3000K/6400K80°C60mmx110mm 

29

2016-08

LED Filament light bulb
HistoryCarbon filament bulbs were the first commercially viable electric light bulbs to hit the consumer market in 1882. In 1904, a tungsten filament was shown to be more efficient and longer lasting than the carbonized bamboo filament used previously.The introduction of a neutral gas to the glass envelope (or bulb) also helped to improve lifespan and brightness of the bulb. To produce enough light, these lamps required the use of extremely long filaments, and remained so until the development of more efficiently wound tungsten filaments. Edisons lightbulb was classed "awful" or cheap by many when it first arrived in the markets. Famously Lord Duffington- Wheel was said to have quoted "Edisons Lightbulb is a cheap peice of mechanismCurrent situationLED Filament light bulbs are designed to replicate the same light color and bulb shape to offer a more energy-efficient version of the popular vintage reproduction bulbs. These bulbs also maintain the same “exposed” look to further preserve

22

2016-08

LED Downlight Time
Generally, downlight have two installation ways, one surface mounted, another recessed. Recently, our R&Dwas achieved a surface mounted and recessed easily alternately, which means you just need to buy one but for two installed place. Here is some basic information about the downlight. A recessed light is a light fixture that is installed into a hollow opening in a ceiling. When installed it appears to have light shining from a hole in the ceiling, concentrating the light in a downward direction as a broad floodlight or narrow spotlight. A surface mounted light in the ceiling just two expansion screws concealed by a certain skill will be able to put something dark light, bring to life a lot of convenience   Advantage:Compare with the traditional lamp has the following advantages: energy saving, low-carbon, long life, good color, fast response. LED downlight design more beautiful light, can reach to maintain the overall architectural unity and perfect installation, does not destroy the
  • Total 2 pages  Go to Page
  • Go
Add: No.32 Tianhe Rd, Yuhang Development Area, Hangzhou, Zhejiang, China
Tel: +86-571-86239527
Fax: +86-571-86232527
E-mail: gm@hzjyec.com
Hangzhou Jingying Industrial Co., Ltd